Gigabyte R263-S30-AAC1, User Manual

Page: 90 / 114

- 90 -
BIOS Setup
5-3-7 PCH Configuration
Parameter
Description
PCH-IO Configuration
SATA And RST Configuration/
SATA Controller And RST
Configuration
Press [Enter] to configure advanced items.
Š
SATA Configuration
– Enable/Disable SATA controller.
– Options available: Enabled, Disabled. Default setting is Enabled .
Š
SATA Mode Selection
– Configures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI
functionality. Then the RAID function is disabled and cannot be
access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both its
RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.
– Options available: AHCI, RAID. Default setting is AHCI .
Š
RAID Device ID
(Note)
– Choose RAID Device ID.
– Options available: Client, Alternate, Server. Default setting is Server
.
Š
SATA Port 0/1/2/3/4/5/6/7
– The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
(Note) Only appears when HDD sets to RAID Mode.