Gigabyte R263-S30-AAC1 User Manual Download Page 87

Page: 87 / 114

- 87 -

BIOS Setup

Parameter

Description

Interrupt Remapping

– Enable/Disable the interrupt remapping support function.

– Options available: Auto, Enable, Disable. Default setting is

Auto

x2APIC Opt Out

– Options available: Enable, Disable. Default setting is

Disable

Pre-boot DMA Protection

– Options available: Enable, Disable. Default setting is

Disable

Intel

VMD technology

Press [Enter] to configure advanced items.

Intel

VMD Configuration

– Enable/Disable Intel

VMD technology.

– Options available: Enable, Disable. Default setting is

Disable

Intel

VMD for Non-Hotplug NVMe

(Note)

– Enable/Disable Intel

VMD for Non-Hotplug NVMe.

– Options available: Enable, Disable. Default setting is

Disable

(Note) This item appears when

Intel

VMD Configuration

is set to

Enable

Summary of Contents for R263-S30-AAC1



















































































































Search results

Summary of Contents for R263-S30-AAC1

Reviews:

Gigabyte R263-S30-AAC1, User Manual, Page: 87 / 114

Search results

Summary of Contents for R263-S30-AAC1

Reviews: