manualshive.com logo in svg

Gigabyte R183-Z91, User Manual, Page: 156 / 165

Share
Download
Gigabyte R183-Z91 User Manual Download Page 156

BIOS Setup

- 156 -

5-6-3 

BMC Network Configuration

Parameter

Description

BMC network configuration

Lan Channel 1

Configuration Address source

Selects to configure LAN channel parameters statically or dynamically 

(DHCP). Do nothing option will not modify any BMC network parameters 
during BIOS phase.

Options available: Unspecified, Static, DynamicBmcDhcp. Default setting 

is 

DynamicBmcDhcp

.

Station IP address

Displays IP Address information.

Subnet mask

Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example, 
192.168.000.001.

Router IP address

Displays the Router IP Address information. 

Station MAC address

Displays the MAC Address information. 

VLAN Support

Set BMC to enable/disable VLAN support.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

Real-time synchronize BMC 
network parameter values

Press [Enter] will set Address source(Static/DHCP) to BMC and then get 
Station IP address, Subnet mask and Router IP address from BMC.

Summary of Contents for R183-Z91






































































































































































Reviews:

No comments