Gigabyte R183-Z90-AAD1, User Manual

Page: 66 / 163

BIOS Setup
- 66 -
Parameter
Description
Legacy Console Redirection
Legacy Console Redirection
Settings
Press [Enter] to configure advanced items.
Š
Redirection COM Port
– Selects a COM port for Legacy serial redirection.
– Default setting is COM1/SOL .
Š
Resolution
– Selects the number of rows and columns used in Console
Redirection for legacy OS support.
– Options available: 80x24, 80x25. Default setting is 80x24 .
Š
Redirect After POST
– When Bootloader is selected, then Legacy Console Redirection
is disabled before booting to legacy OS. When Always Enable is
selected, then Legacy Console Redirection is enabled for legacy
OS.
– Options available: Always Enable, BootLoader. Default setting is
Always Enable .
Serial Port for Out-of-Band
Management / Windows
Emergency Management
Services (EMS) Console
Redirection
(Note)
EMS console redirection allows the user to configure Console Redirection
Settings to support Out-of-Band Serial Port management.
Options available: Disabled, Enabled. Default setting is
Disabled .
Serial Port for Out-of-Band
EMS Console Redirection
Settings
Press [Enter] to configure advanced items.
Please note that this item is configurable when Serial Port for Out-of-
Band Management EMS Console Redirection is set to Enabled.
Š
Out-of-Band Mgmt Port
– Microsoft Windows Emergency Management Service (EMS) allows
for remote management of a Windows Server OS through a serial
port.
– Default setting is COM1/SOL .
Š
Terminal Type
– Selects a terminal type to be used for console redirection.
– Options available: VT100, VT100+, ANSI, VT-UTF8. Default setting
is ANSI .
Š
Bits per second
– Selects the transfer rate for console redirection.
– Options available: 9600, 19200, 57600, 115200. Default setting is
115200 .
(Note) Advanced items prompt when this item is defined.