Gigabyte R163-Z30-AAB1 User Manual Download

Page: 70 / 162

BIOS Setup

- 70 -

5-2-9

Network Stack Configuration

(Note) This item appears when

Network Stack

is set to

Enabled

Parameter

Description

Network Stack

Enable/Disable the UEFI network stack.
Options available: Enabled, Disabled. Default setting is

Enabled

Ipv4 PXE Support

(Note)

Enable/Disable the Ipv4 PXE feature.
Options available: Enabled, Disabled. Default setting is

Enabled

Ipv4 HTTP Support

(Note)

Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled, Disabled. Default setting is

Disabled

Ipv6 PXE Support

(Note)

Enable/Disable the Ipv6 PXE feature.
Options available: Enabled, Disabled. Default setting is

Enabled

Ipv6 HTTP Support

(Note)

Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled, Disabled. Default setting is

Disabled

PXE boot wait time

(Note)

Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

(Note)

Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.

Summary of Contents for R163-Z30-AAB1



































































































































































Search results

Summary of Contents for R163-Z30-AAB1

Reviews:

Related manuals for R163-Z30-AAB1

Brands by name

Popular brands

Gigabyte R163-Z30-AAB1, User Manual

Search results

Summary of Contents for R163-Z30-AAB1

Reviews:

Related manuals for R163-Z30-AAB1

Brands by name

Popular brands