BIOS Setup
- 69 -
Parameter
Description
Device reset time-out
Selects the time-out value during a USB mass storage device reset.
Options available: 10 sec, 20 sec, 30 sec, 40 sec.
Default setting is
20 sec
.
Device power-up delay
Maximum time the device will take before it properly reports itself to the
Host Controller. "Auto" uses default value: for a Root port it is 100 ms, for a
Hub port the delay is taken from Hub descriptor.
Options available: Auto, Manual. Default setting is
Auto
.
Mass Storage Devices
Displays the mass storage devices available on the system.
Summary of Contents for R163-Z30-AAB1
