manualshive.com logo in svg

Gigabyte R163-S30-AAB1, User Manual

Share
Download
Gigabyte R163-S30-AAB1 User Manual Download Page 75

- 75 -

BIOS Setup

Parameter

Description

Memory Encryption (TME)

(Note)

Enable/Disable memory encryption (TME).
Options available: Enabled, Disabled. Default setting is 

Disabled

.

Total Memory Encryption
Multi-Tenant (TME-MT)

Options available: Enabled, Disabled. Default setting is 

Disabled

.

Processor CFR Configuration

Press [Enter] to configure advanced items.

 

Š

Provision S3M CFR

 

– Options available: Disable, Enable. Default setting is 

Enable

.

 

Š

Manual Commit S3M FW CFR

 

– Options available: Disable, Enable, Auto. Default setting is 

Auto

.

 

Š

Provision PUcode CFR

 

– Options available: Disable, Enable. Default setting is 

Enable

.

 

Š

Manual Commit PUcode CFR

 

– Options available: Enable, Disable, Auto. Default setting is 

Auto

.

 

Š

Socket0 CFR Revision Info

 

– Displays CFR Revision information of the socket.

(Note)  Advanced items prompt when this item is defined.

Summary of Contents for R163-S30-AAB1















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands