manualshive.com logo in svg

Gigabyte R162-ZA2, User Manual

Share
Download
Gigabyte R162-ZA2 User Manual Download Page 112

- 111 -

BIOS Setup

5-3-4  NBIO Common Options

Parameter

Description

NBIO Common Options

IOMMU

Enable/Disable the IOMMU function.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

DMAr Support

Enable/Disable DMAr system protection during POST.
Options available: Enabled, Disabled, Auto. Default setting is 

Auto

.

DRTM Virtual Device 
Support

Enable/Disable DRTM ACPI virtual device.
Options available: Enabled, Disabled, Auto. Default setting is 

Auto

.

PCIe ARI Support

Enable/Disable Alternative Routing-ID Interpretation.
Options available: Auto, Enable, Disable. Default setting is 

Auto

.

PCIe ARI Enumeration

ARI Forwarding Enable for each downstream port.
Options available: Auto, Enable, Disable. Default setting is 

Auto

.

PCIe Ten Bit Tag Support

Enable/Disable PCIe ten bit tags for supported devices. (Auto=Disabled)
Options available: Auto, Enable, Disable. Default setting is 

Auto

.

SMU Common Options

Press [Enter] for configuration of advanced items.

NBIO RAS Common 
Options

Press [Enter] for configuration of advanced items.

Enable AER Cap

Enable/Disable Advanced Error Reporting Capability.
Options available: Auto, Enable, Disabled. Default setting is 

Auto

.

Summary of Contents for R162-ZA2
















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands