Gigabyte Myou S1024, User Manual, Page: 42 / 67

32
ENGLISH
TROUBLESHOOTING
Your Myou S1024 Small Notebook PC is sturdy and subject to few problems in the field. However,
you may encounter simple setup or operating problems that you can solve on the spot, or prob-
lems with peripheral devices, that you can solve by replacing the device. The information in this
section helps you isolate and resolve some of these straightforward problems and identify failures
that require service.
Identifying the Problem
If you encounter a problem, go through the following procedures before pursuing complex
troubleshooting:
1. Turn off your Myou S1024 Computer.
2. Make sure the AC adapter is plugged into your Myou S1024 Computer and to an active AC
power source.
3. Make sure that any card installed in the PC Card slot is seated properly. You can also remove
the card from the slot, thus eliminating it as a possible cause of failure.
4. Make sure that any devices connected to the external connectors are plugged in properly. You
can also disconnect such devices, thus eliminating them as possible causes of failure.
5. Turn on your Myou S1024 Computer. Make sure it has been off at least 10 seconds before you
turn it on.
6. Go through the boot sequence.