manualshive.com logo in svg

Gigabyte MX32-4L0, User Manual, Page: 34 / 83

Share
Download
Gigabyte MX32-4L0 User Manual Download Page 34

BIOS Setup

- 34 -

2-2-2  PCI Subsystem Settings

(Note1)  This section is dependent on the available PCIe Slot.
(Note2)  This section is dependent on the available LAN controller.

Parameter

Description

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

PCI Express Slot #1 / #2 I/O ROM

(Note1)

When enabled, this setting will initialize the device expansion 
ROM for the related PCI-E slot.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Onboard LAN1 / LAN2 / LAN3 / LAN4 
Controller

(Note2)

Enable/Disable the onboard LAN1/ LAN2/ LAN3/ LAN4 devices.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Onboard LAN1 / LAN2 / LAN3 / LAN4 
I/O ROM

(Note2) 

Enable/Disable the onboard LAN1/ LAN2/ LAN3/ LAN4 devices, 
and initializes device expansion ROM.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

PCI Devices Common Settings

SR-IOV Support

If the system has SR-IOV capable PCIe devices, this item 
Enable/Disable Single Root IO Virtualization Support. 
Options available: Enabled/Disabled. Default setting is 

Enabled

.

Summary of Contents for MX32-4L0




















































































Reviews:

No comments