manualshive.com logo in svg

Gigabyte H262-P61, User Manual

Share
Download
Gigabyte H262-P61 User Manual Download Page 58

- 58 -

BIOS Setup

2-2-6-1 PCI Express GEN 1 Settings

Parameter

Description

PCI Express Device Register Settings

Relaxd Ordering

Enable/disable PCI Express Device Relaxed Ordering.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Extended Tag

If enabled, allows device to use 8-bit tag field as a requester.

Options available: Enabled, Disabled. Default setting is 

Disabled

.

No Snoop

Enable/disable PCI Express Device No Snoop option.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

Maximum Payload

Set maximum payload of PCI express device or allow system 
BIOS to select the value.
Options available: Auto, 128 Bytes, 256 Bytes, 512 Bytes. Default 
setting is 

Auto

.

Maximum Read Request

Set maximum Read Request size of PCI express device or allow 
system BIOS to select the value.
Options available: Auto, 128 Bytes, 256 Bytes, 512 Bytes, 1024 
Bytes, 2048 Bytes, 4096 Bytes. Default setting is 

Auto

.

PCI Express Link Register Settings

Extended Synch

If enabled, allows generation of extended synchronization 
patterns.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

Summary of Contents for H262-P61





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands