manualshive.com logo in svg

Gigabyte H252-Z12, User Manual, Page: 109 / 116

Share
Download
Gigabyte H252-Z12 User Manual Download Page 109

- 107 -

BIOS Setup

5-7-1  Secure Boot

Parameter

Description

System Mode

Displays the system is in User mode or Setup mode.

Secure Boot

Enables/Disables Secure Boot. The mode change requires a platform

reset.

Options available: Disabled/Enabled. Default setting is 

Disabled

.

Secure Boot Mode

(Note)

Secure Boot requires all the applications that are running during the 

booting process to be pre-signed with valid digital certificates. This way, 
the system knows all the files being loaded before Windows loads and 

gets to the login screen have not been tampered with.
When set to Standard, it will automatically load the Secure Boot keys form 
the BIOS databases.
When set to Custom, you can customize the Secure Boot settings and 
manually load its keys from the BIOS database.

Options available: Standard/Custom. Default setting is 

Custom

.

Restore Factory Keys

Forces the system to user mode and installs factury default Secure Boot
key database.

Key Management

Press [Enter] to configure advanced items.

Please note that this item is configurable when Secure Boot Mode is 

set to Custom.

(Note)  Advanced items prompt when this item is set to 

Custom

.

Summary of Contents for H252-Z12





















































































































Reviews:

No comments