Hardware Installation
- 7 -
English
You are now ready to proceed with the installation of the graphics card driver. Please
refer to next chapter for detailed instructions.
2. Replace the screw to fasten the card in place,
and replace the computer cover.
To install your new graphics card:
1. Locate a PCI Express x16 slot. If necessary,
remove the metal cover from the slot; then
align your graphics card with the PCI
Express x16 slot, and press it in firmly until
the card is fully seated.
* Please make sure that the gold edge connectors of the graphics card is securely inserted.
3. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below.
To TV/VCR
To VGA Monitor
To Flat Panel Display
