Gigabyte GV-NX76G256D-RH, User Manual

Page: 15 / 42

Hardware Installation - 9 -
English
You are now ready to proceed with the installation of the graphics card driver. Please refer
to next chapter for detailed instructions.
To TV/VCR
To VGA Monitor
To Flat Panel Display
2. Replace the screws to fasten the card in
place, and replace the computer cover.
3. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a Dual-Link DVI-I
connector, you can connect a flat panel
display to the appropriate connector, as
shown below...
To install your new graphics card:
1. Locate one PCI Express x16 slot. If
necessary, remove the metal cover from the
slot; then align your graphics card with the
PCI Express x16 slot, and press it in firmly
until the card is fully seated.
* Please make sure that the gold edge connectors
of the graphics card is securely inserted.