Hardware Installation
- 7 -
English
3. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
You are now ready to proceed with the installation of the graphics card driver. Please refer
to next chapter for detailed instructions.
To TV or VCR
To VGA Monitor
To Flat Panel Display
2. Replace the screw to fasten the card in place,
and replace the computer cover.
To install your new graphics card:
1. Locate the PCI Express x 16 slot. If
necessary, remove the metal cover from this
slot; then align your graphics card with the
PCI Express x 16 slot, and press it in firmly
until the card is fully seated.
After installation, please connect the power cable to
your graphics card, or the system will not boot.
