Software Installation
- 19 -
English
nView Display Settings properties
nView allows you to connect separate displays to single
graphics card.
• nView Display mode: select your preferred nView display
modes here. Options: Single display/ Clone/ Dualview
• Primary/Secondary display: select a single display or
display pair. The selected display combination will appear
in the graphical representation below.
• Make this the primary display: Specifies that the display
corresponding to the icon you selected above is the
primary display.
• Click Apply to apply settings or click OK to save settings.
If TV is chosen as the display, you will need to select the
proper TV format. To do this, click "Device Settings" followed
by "Select TV format". Select the format for your television
and then click "Apply" followed by "OK".
Dual-Monitor Setup:
You can set the display to output from two monitors on the nView Display Settings page.
The GV-NX62TC256P8-RH / GV-NX62TC256P4-RH supports the following modes.
Clone Mode
Dual View Mode
(2) Dual View Mode:
Dualview mode indicates that both displays in the
display pair function as one virtual desktop. Unlike
Horizontal Span or Vertical Span mode, Dualview
treats each display as a separate device. This means
that the taskbar will not be stretched across displays
and 3D applications are not accelerated as efficiently
as when the application spans displays.
Select
DualView
from the
nView
Display Mode
list
and click
Apply
.
(1) Clone Mode:
Clone mode indicates that both displays in the display
pair show images of the same desktop.
Select
Clone
from the
nView
Display Mode
list and
click
Apply
.
Display
Model
GV-NX62TC256P8-RH GV-NX62TC256P4-RH
Matrix
CRT+TV
Yes
Yes
CRT+DVI
Yes
Yes
DVI+TV
Yes
Yes
