Hardware Installation
- 7 -
English
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
To TV or VCR
To Flat Panel Display
4. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully
seated.
5. Replace the screw to fasten the card in
place, and replace the computer cover.
6. Plug the display cable into your graphics
card; then turn on the computer and
monitor. To connect a flat panel directly to
your graphics card, use the DVI-I connector.
To connect a VGA monitor to the DVI-I
connector, plug the DVI-I to D-sub adapter
into the DVI-I connector, then plug the
monitor cable into the adapter.
After installation, please connect the power cable to your
GV-N68U256D graphics card, or the system will not boot.
Connect a flat panel
Connect a VGA monitor via DVI-I to D-sub adapter
Summary of Contents for GV-N68U256D
Page 1: ...Jun 14 2004 VGA Card GV N68U256D...
Page 2: ...VGA Card Jun 14 2004 GV N68U256D...
Page 39: ...Appendix 37 English...
