GV-N66T128D/GV-N66T128VP Graphics Accelerator
- 8 -
English
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
4. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully
seated.
After installation, please connect the power cable to your
graphics card, or the system will not boot.
6. Plug the display cable into your graphics
card; then turn on the computer and
monitor.
To TV or VCR
To VGA Monitor
To Flat Panel Display
5. Replace the screw to fasten the card in
place, and replace the computer cover.
When installing the graphics card, do not push down the heat
pipe. This may displace the heat pipe and cause bad contact
between the GPU and thermal pad as well as affect the heat
dissipation. To avoid system instability, do not touch the
graphics card when it is running.
