Gigabyte GV-N52128DS Manual Download Page 4

Page: 4 / 7

- 3 -

English

Installing your graphics card.
Now that you have prepared your computer, you are ready to install your graphics card.

2. Hardware Installation

1. Locate the AGP slot. If necessary, remove the metal

cover from this slot; then align your graphics card
with the AGP slot, and press it in firmly until the card
is fully seated.

2. Replace the screw to fasten the card in place, and

replace the computer cover.

3. Plug the display cable into your card; then turn on

the computer and monitor.

Summary of Contents for GV-N52128DS

Page 1: ...VGA Card GV N52128DS Feb 4 2005 Feb 4 2005 VGA Card GV N52128DS ...

Page 3: ... Integrated with 128MB DDR memory Supports TV Out and D Sub connectors Supports DVI D connector 1 2 Board Layout 1 Introduction VGA Monitor Connector 15 pin RCA DVI D Connector OR NTSC PAL TV AV Output RCA VGA Monitor Connector 15 pin DVI D Connector Analog LCD Monitor Analog Monitor VGA Output Digital LCD Monitor DVI Output ...

Page 4: ...tallation 1 Locate the AGP slot If necessary remove the metal cover from this slot then align your graphics card with the AGP slot and press it in firmly until the card is fully seated 2 Replace the screw to fasten the card in place and replace the computer cover 3 Plug the display cable into your card then turn on the computer and monitor ...

Page 6: ...c engine and video memory Core Clock and Memory Clock Display Adjust Core Clock Display Core Clock Min V Tuner Close V Tuner Display Memory Clock Link to the Website of Gigabyte Close V Tuner to System Tray Display Adjust Memory Clock Help Description Click Utilities item Then click V Tuner item ...