GV-N52128DE/GV-N52128TE Graphics Accelerator
- 8 -
English
You are now ready to proceed with the installation of the graphics card drivers. Please
refer to next chapter for detailed instructions.
4. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully eated.
5. Replace the screw to fasten the card in
place, and replace the computer cover.
6. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
To TV or VCR
To VGA Monitor
To Flat Panel Display
(For GV-N52128DE only)
S-Video
(For GV-N52128TE only)