GS-SR222 System Installation Guide
18
Figure 20
Figure 21
Step 7.
Put the PCI raiser bracket into the server system. (Fig-20)
Step 8.
Securing the bracket with tighten the raiser card firming
screw. (Fig-21)
5.6. Air
Flow
Duct Installation
GS-SR222 is enhanced a new device which called Airflow Duct.
The main function of the airflow duct is to increase the capability
of driving out the excessive system heat (Especially the CPU
heat). In order to maintain the system operating smoothly, please
note that the
CPU
and
Memory
are installed in advance.
Remember to install the airflow duct back to into the system to
ensure the consistency of system operation.
To install the airflow duct properly, please take the following steps:
Step 1.
There are two holes on locate on the system module.
(Fig-22)
There are two stable racks on the airflow duct.
Summary of Contents for GS-SR 222
Page 1: ...GS SR 222 Rack Mount Server System Installation Guide ...
Page 2: ......