- 35 -
Hardware Installation
No.
Jumper Code
Jumper Setting
5.
BIOS_RVCR1
(BIOS Recovery Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: BIOS recovery mode.
6.
SSB_ME1
(ME enable/
disable Jumper)
1-2 Close: Normal operation. (Default setting)
2-3 Close: ME recovery mode (S/W).
7.
FLASH_DP1
(Flash Descriptor
Security Jumper)
1-2 Close: Flash Descriptor Security Overridden
2-3 Close: Flash Descriptor Security in effect.
(Default setting)
8.
S3_MASK (S3 Power
On Select Jumper)
1-2 Close: Stop an initial power on when BMC is not ready.
2-3 Close: Keep initial power on. (Default setting)
9.
SATA_DOM2
(SATA port 2
DOM Jumper)
1-2 Close: Use SATA DOM.
2-3 Close: Normal mode. (Default setting)
10.
SATA_DOM1
(SATA port 1
DOM Jumper)
1-2 Close: Use SATA DOM.
2-3 Close: Normal mode. (Default setting)
CAUTION!
If a SATA type hard drive is connected to the system, please ensure the jumper is
closed and set to
2-3 pins
(Normal mode), in order to reduce any risk of hard disk damage.
