manualshive.com logo in svg

Gigabyte GS-R127H-RH, System Installation Manual

Share
Download
Gigabyte GS-R127H-RH System Installation Manual Download Page 45

4 5

BIOS Setup

I/O Acceleration Technology

It addresses all segments of the server I/O bottleneck problem using TCP/IP and without
requiring any modification of existing or future applications.

Enabled

Enable I/O Acceleration Technology. (Default setting)

Disabled

Disable this function.

Wake On Ring

This option allow user to determine the action of the system power is off and the modem is

ringing.

Enabled

Enable Wake On Ring. (Default setting)

Disabled

Disable this function.

Note: This item must enabled if you’re running under Windows operating system.

Wake On RTC Alarm

When "RTC Alarm Resume" item is set to enabled, system will wakeup from RTC. (This item
will be functionalized under ACPI OS)

Enabled

Enable alarm function to POWER ON system.  (Default setting)

Disabled

Disable this function.

Note: This item must enabled if you’re running under Windows operating system.

Summary of Contents for GS-R127H-RH



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands