1 5
GS-R1231-RH Rack Mount Server
Step 2-5: PCI Expansion Card Installation
GS-R1231-RH provides expansion riser slots for two PCI-E x16 slot. To install the peripheral, please go
through the following steps.
Note!!
Before installing the expansion card, please check the card size limitation. Size limitation for
standard riser card is 182mm; and the size limitation for low profile riser card is 182mm.
Step 1 Loosen the riser bracket screws.
Step 2 Lift the riser bracket slightly, then pull it out from the server chassis.
Step 3 Align the expansion card with the guiding groove. Slide the expansion card into the slot until the
card firmly seats.
Step 4 Align the riser bracket to the system module.
2
4
1
3
1
