18
3-1-2-2. 802.1x
Settings - CA Server Tab
CA Server is used when TLS, TTLS or PEAP is in use. When
Use certificate chain
is
checked, the Client can verify if such server is reliable and then transmit Client Certificate
after the verification is confirmed.
Figure 3-7. CA Server Setting
To verify the CA server:
1. Confirm if the Server Certificate is issued by assigned certificate issuer. If “Allow
Intermediate Authentication” is checked, the server certificate can be issued by
one intermediate certificate issuer.
2. Check the server name of server certificate is the same as the name entered by
the user or belongs to the same domain.
Use certificate chain:
If “Use certificate chain” is checked, it indicates that Client will
confirm whether CA server is reliable. (Default: OFF)
Certificate issuer:
CA of a server certificate can be selected from certificate issuers on
the drop-down list. (Default: ANY)
Allow intermediate Certificates:
When this option is checked, the certificate issuer can
be an issuer recognized by a specific certificate issuer. On the other hand, the server
certificate must be issued by a certificate issuer selected by the user.
Server name:
This value can be a server name or the name of a domain where the server
is located.
