Gigabyte GN-BRO1G, User Manual

Page: 16 / 88

16
E
N
G
LI
S
H
If you want to start over
On the bottom of GN-BRO1G is a reset button
Init
, which resets the preset
settings. Do as follows:
•
The router should be turned on (the PWR lamp is lit with green light). Use
a paper clip or similar to push and hold the Init button. The PWR lamp
switches to red light and then back to green light. Release the button, the
lamp lights red and then green again. The router has been resetted.
•
The username and password are also reset to factory settings.
8.2 I cannot connect to other devices on the network
Possible cause
•
The computers’ IP addresses are incorrectly set.
•
The network cables are not properly connected.
• The network settings in Windows are incorrect.