32
3.6.4. MAC
Address
Control
MAC Address Control allows you to assign different access right for different users
and to assign a specific IP address to a certain MAC address.
MAC Address Control
Check “Enable” to enable the “MAC Address Control”. All of the settings in this
page will take effect only when “Enable” is checked.
Connection control
Check "Connection control" to enable the controlling of which wired can connect
to this device. If a client is denied to connect to this device, it means the client
can't access to the Internet either. Choose "allow" or "deny" to allow or deny the
clients, whose MAC addresses are not in the "Control table" (please see below),
to connect to this device.
Control table
Summary of Contents for GN-B40
