Gigabyte GH-PDU22-SC, Installation Manual

Page: 6 / 22

- 6 -
GH-PDU22-SC
English
Figure 1
Place the LGA775RM onto the LGA775 motherboard so that
side A is parallel with ARM and side B is parallel with CAM.
Figure 2
From the underside of the motherboard, use screws (4) and
plastic washers (4) together to secure the LGA775RM into
place..
Installation Instructions for P4 LGA775RM & Cooler
Figure 1
Figure 2
Figure3- 1
Figure3-2
Side A
Side B
Please add an adequate layer of heat sink
paste on the surface of the CPU.
ARM
CAM
Plastic
Washers
Figure 3
Gently push down on the cooler unit to lock it into position.
(Figure3-1).Connect the 3-pin connector to the CPU fan
connector on the motherboard.(Figure 3-2).Installation is now
complete.
If fan speed control is required, please refer to "Installation of the
Fan Speed Control Cable".
Note: About P4 Clips installation, please refer to “Installation
Instructions for Intel
® Pentium ® 4 mPGA478 Clips”
To install GH-PDU22-SC on LGA775
motherboard needs both LGA775 RM & P4
clips.