Gigabyte GH-PDU21-SC, Installation Manual

Page: 7 / 22

- 7 -
GH-PDU21-SC
English
Installation Instructions for Intel
®
Pentium
®
4 mPGA478 Clips
Figure 2
Clip introduction--
Part A: Secured to the retention mechanism hook.
Part B: Tightly contact the cooler bracket.
Part C: Secured to the retention mechanism hook.
Figure 1-1
Figure 1-2
Figure 3-1
Figure 4
Figure 3-2
Figure 4
Connect the 3-pin connector to the CPU fan connector on the
motherboard. Clips Installation is now complete.
If fan speed control is required, please refer to "Installation of
the Fan Speed Control Cable".
A
B
C
Figure 2
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU(Figure1-1). Figure 1-2 showing the correct
installation of the cooler atop the CPU.
Figure 3
Secure Parts A, B, and then C of the clip to the retention
mechanism. Assure that Part C is secured to the retention
mechanism hook on the same side as the heat pipes.