Gigabyte GA-Z77X-D3H User's manual, User Manual, Page: 31 / 120

- 31 - Hardware Installation
17) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the
CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch
the two pins for a few seconds.
Always turn off your computer and unplug the power cord from the power outlet before clearing
•
the CMOS values.
After system restart, go to BIOS Setup to load factory defaults (select Load Optimized •
Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS
configurations).
Open: Normal
Short: Clear CMOS Values