Gigabyte GA-Z68AP-D3 User Manual Download

Page: 66 / 112

Unique Features

- 66 -

4-2 BIOS Update Utilities

GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash

™

and @BIOS

™

. GIGABYTE

Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS
mode. Additionally, this motherboard features the DualBIOS

™

design, which enhances protection for the

safety and stability of your computer by adding one more physical BIOS chip.

What is DualBIOS

™

Motherboards that support DualBIOS have two BIOS onboard, a main BIOS and
a backup BIOS. Normally, the system works on the main BIOS. However, if the

main BIOS is corrupted or damaged, the backup BIOS will take over on the next system boot and copy the

BIOS file to the main BIOS to ensure normal system operation. For the sake of system safety, users cannot

update the backup BIOS manually.

What is Q-Flash

™

With Q-Flash you can update the system BIOS without having to enter operating

systems like MS-DOS or Window first. Embedded in the BIOS, the Q-Flash tool

frees you from the hassles of going through complicated BIOS flashing process.

What is @BIOS

™

@BIOS allows you to update the system BIOS while in the Windows environ-

ment. @BIOS will download the latest BIOS file from the nearest @BIOS server

site and update the BIOS.

4-2-1 Updating the BIOS with the Q-Flash Utility

A. Before You Begin

1. From GIGABYTE's website, download the latest compressed BIOS update file that matches your moth

erboard model.

2. Extract the file and save the new BIOS file (e.g. z68apd32.f1) to your USB flash drive, or hard drive.

Note: The USB flash drive or hard drive must use FAT32/16/12 file system.

3. Restart the system. During the POST, press the <End> key to enter Q-Flash. Note: You can access

Q-Flash by either pressing the <End> key during the POST or pressing the <F8> key in BIOS Setup.

However, if the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached to

an independent SATA controller, use the <End> key during the POST to access Q-Flash.

Award Modular BIOS v6.00PG

Z68AP-D3 FA

<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash

09/14/2011-Z68-7A89XG0BC-00

Because BIOS flashing is potentially risky, please do it with caution. Inadequate BIOS flashing may

result in system malfunction.

Summary of Contents for GA-Z68AP-D3

















































































































Search results

Summary of Contents for GA-Z68AP-D3

Reviews:

Related manuals for GA-Z68AP-D3

Brands by name

Popular brands

Gigabyte GA-Z68AP-D3, User Manual

Search results

Summary of Contents for GA-Z68AP-D3

Reviews:

Related manuals for GA-Z68AP-D3

Brands by name

Popular brands