background image

BIOS Setup

- 48 -

 

&

Reset Case Open Status

 

Disabled   

Keeps or clears the record of previous chassis intrusion status. (Default)

 

Enabled   

 Clears the record of previous chassis intrusion status and the 

Case Open

 field will 

show "No" at next boot.

 

&

Case Open

 

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI 

header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To 

clear the chassis intrusion status record, set 

Reset Case Open Status

 to 

Enabled

, save the settings to 

the CMOS, and then restart your system.

 

&

CPU Vcore/CPU VRIN/CPU VCCIO/DRAM Channel A/B Voltage/DRAM Channel C/D Voltage/ 
DDRVPP Channel A/B Voltage/DDRVPP Channel C/D V5V/PCH IO/PCH Core/+12V

 

Displays the current system voltages.

 

&

CPU/PCH Temperature

 

Displays current CPU/Chipset temperature.

 

&

1st System Temperature/2nd System Temperature

 

Displays current system temperatures detected by the system temperature sensors on the motherboard.

 

&

CPU/CPU OPT/System Fan Speed

 

Displays current CPU/CPU_OPT/system fan speeds.

 

&

CPU/System (SYS_FAN1~SYS_FAN2)/PCH Temperature Warning

 

Sets the warning threshold for CPU/system/Chipset temperature. When temperature exceeds the threshold, 

BIOS will emit warning sound. Options are: Disabled (default), 60

o

C/140

o

F, 70

o

C/158

o

F, 80

o

C/176

o

F, 

90

o

C/194

o

F.

 

&

CPU/CPU OPT/System Fan Fail Warning

 

Allows the system to emit warning sound if the fan is not connected or fails.  Check the fan condition or 

fan connection when this occurs. (Default: Disabled)

 

&

CPU Fan Speed Control (CPU_FAN Connector)

 

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

 

Normal   

 Allows the fan to run at different speeds according to the CPU temperature. You 

can adjust the fan speed with System Information Viewer based on your system 

requirements. (Default)

 

Silent   

 

Allows the fan to run at slow speeds.

 

Manual   

Allows you to control the fan speed under the 

Fan Speed Percentage

 item.

 

Full Speed  

Allows the fan to run at full speeds.

 

&

Fan Speed Percentage

 

Allows you to control the fan speed. This item is configurable only when 

CPU Fan Speed Control

 is set 

to 

Manual

. Options are: 0.75 PWM value /

o

C ~ 2.50 PWM value /

o

C.

 

&

CPU OPT Fan Speed Control (CPU_OPT Connector)

 

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

 

Normal   

 Allows the fan to run at different speeds according to the CPU temperature. You 

can adjust the fan speed with System Information Viewer based on your system 

requirements. (Default)

 

Silent   

 

Allows the fan to run at slow speeds.

 

Manual   

Allows you to control the fan speed under the 

Fan Speed Percentage

 item.

 

Full Speed  

Allows the fan to run at full speeds.

Summary of Contents for GA-X99P-SLI

























































































Reviews: