Configuring SATA Hard Drive(s)
- 70 -
Step 3:
On the
Intel(R) Rapid Storage Technology
menu, press <Enter> on
Create RAID Volume
to enter the
Create
RAID Volume
screen. Enter a volume name with 1~16 letters (letters cannot be special characters) under the
Name
item and press <Enter>. Then, select a RAID level (Figure 4). RAID levels supported include RAID 0,
RAID 1, RAID 10, and RAID 5 (the selections available depend on the number of the hard drives being installed).
Next, use the down arrow key to move to
Select Disks
.
Step 4:
Under
Select Disks
item, select the hard drives to be included in the RAID array. Press the <Space> key on
the hard drives to be selected (selected hard drives are marked with "X"). Then set the stripe block size (Figure
5). The stripe block size can be set from 4 KB to 128 KB. Once you have selected the stripe block size, set
the volume capacity.
Figure 4
Figure 5
Summary of Contents for GA-X99-UD4P
