Gigabyte GA-X38T-DQ6 User Manual Download Page 10

Page: 10 / 116

GA-X38T-DQ6 Motherboard

- 10 -

English

1-2

Product Specifications

CPU

Support for an Intel

Core

2 Extreme processor/

Intel

Core

2 Quad processor/Intel

Core

2 Duo processor/

Intel

Pentium

processor Extreme Edition/Intel

Pentium

D processor/

Intel

Pentium

4 processor Extreme Edition/Intel

Pentium

4 processor/

Intel

Celeron

processor in the LGA 775 package

(Go to GIGABYTE's website for the latest CPU support list.)

L2 cache varies with CPU

Front Side Bus

1600/1333/1066/800 MHz FSB

Chipset

North Bridge: Intel

X38 Express Chipset

South Bridge: Intel

ICH9R

Memory

4 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of system memory

(Note1)

Dual channel memory architecture

Support for DDR3 1600/1333/1066/800 MHz

memory modules

(Go to GIGABYTE's website for the latest memory support list.)

Audio

Realtek ALC889A codec

High Definition Audio

2/4/5.1/7.1-channel

Support for DTS (dts NEO:PC)

Support for S/PDIF In/Out

Support for CD In

LAN

2 x Realtek 8111B chips (10/100/1000 Mbit)

Expansion Slots

2 x PCI Express x16 slots supporting ATI CrossFire

technology

(The PCI Express x16 slots conform to PCI Express 2.0 standard.)

3 x PCI Express x1 slots

2 x PCI slots

Storage Interface

South Bridge:
-

6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3,
SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices

Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10

GIGABYTE SATA2 chip:
-

1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices

2 x SATA 3Gb/s connectors (GSATAIIA, GSATAIIB) supporting up to
2 SATA 3Gb/s devices

Support for SATA RAID 0, RAID 1, and JBOD

iTE IT8718 chip:
-

1 x floppy disk drive connector supporting up to 1 floppy disk drive

IEEE 1394a

T.I. TSB43AB23 chip

Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket
connected to the internal IEEE 1394a header)

Summary of Contents for GA-X38T-DQ6





















































































































Search results

Summary of Contents for GA-X38T-DQ6

Reviews:

Related manuals for GA-X38T-DQ6

Brands by name

Popular brands

Gigabyte GA-X38T-DQ6, User Manual

Search results

Summary of Contents for GA-X38T-DQ6

Reviews:

Related manuals for GA-X38T-DQ6

Brands by name

Popular brands