Gigabyte GA-SBCAP3455, User Manual

Page: 22 / 34

- 22 -
2-3 Advanced
&
OnBoard LAN Controller (LAN1)
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled .
&
OnBoard LAN Controller#2 (LAN2)
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled .
&
Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
&
PCIE VGA Workaround
Allows you to increase the compatibility of the PCI graphics card. (Default: Disabled)
&
ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to Enabled , the Resume by Alarm function becomes unavailable.
&
LVDS Support
Enables or disables the LVDS function. (Default: Enabled)
&
LVDS Panel Resolution
Allows to you set LVDS resolution and bit rate. (Default: 1366x768 6-bit)
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
Main
OnBoard LAN Controller [Enabled]
OnBoard LAN Controller#2 [Enabled]
Soft-Off by PWR-BTTN [Instant-off]
PCIE VGA Workaround [Disabled]
ErP [Disabled]
LVDS Support [Enabled]
LVDS Panel Resolution [1366x768 6-bit]
`
Realtek PCIe GBE Family Controller (MAC:B4:2E:99:3B:76:8E)
`
Realtek PCIe GBE Family Controller (MAC:B4:2E:99:3B:76:8F)
`
Trusted Computing
`
IT8686 Super IO Configuration
`
Hardware Monitor
`
IT8768SEC Super IO Configuration
`
SIO Misc Functions
`
CPU Configuration
`
Network Stack Configuration
`
CSM Configuration
`
USB Configuration
gf
: Select Screen
hi
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Advanced Boot Save & Exit Security