Gigabyte GA-Q35M-S2, User Manual, Page: 11 / 100

Hardware Installation - 11 -
Internal Connectors
Š
1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Š
1 x floppy disk drive connector
Š
1 x IDE connector
Š
6 x SATA 3Gb/s connectors
Š 1 x CPU fan header
Š 1 x system fan header
Š 1 x front panel header
Š
1 x front panel audio header
Š
1 x CD In connector
Š
1 x S/PDIF In/Out header
Š
3 x USB 2.0/1.1 headers
Š
1 x TPM_CLR header
Š
1 x serial port header
Š 1 x chassis intrusion header
Š 1 x power LED header
Back Panel Š 1 x PS/2 keyboard port
Connectors
Š
1 x PS/2 mouse port
Š
1 x parallel connector
Š
1 x serial connector
Š
1 x D-Sub port
Š
6 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side
Speaker Out/Line In/Line Out/Microphone)
I/O Controller Š iTE IT8718 chip
Hardware Monitor Š System voltage detection
Š CPU/System temperature detection
Š
CPU/System fan speed detection
Š
CPU overheating warning
Š
CPU/System fan fail warning
Š
CPU fan speed control
BIOS
Š
1 x 8 Mbit flash
Š Use of licensed AWARD BIOS
Š PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b