- 12 -
7) LCDVCC_MON (LVDS Drive Voltage Jumper/Flat Panel Display Switch Jumper/Clear
CMOS Jumper)
LCDVCC:This jumper can be used to provide different screen voltage settings.
MON:The jumper allows you to connect an on/off switch for the display or clear CMOS. You can use a
metal object like a screwdriver to touch the two pins for a few seconds.
1
2
5
6
LCD VCC MON
2-4 Close: Set to 3V. (Default)
4-6 Close: Set to 5V.
LCD VCC:
MON:
3-5 Open: Normal
3-5 Short: Clear CMOS Values
1-3 Open: On switch for the display
1-3 Short: Off switch for the display
8) FPD (Flat Panel Display Header)
The FPD is a high-speed interface connecting the output of a video controller in a laptop computer, computer
monitor or LCD television set to the display panel. Most laptops, LCD computer monitors and LCD TVs use
this interface internally. The header conforms to FPD specification.
1
2
7
8
Pin No.
Definition
1
BKLT_EN
2
BKLT_PWM
3
BKLT_PWR
4
BKLT_PWR
5
BKLT_GND/Brightness_GND
6
BKLT_GND/Brightness_GND
7
Brightness_Up
8
Brightness_Down
9
1
10
2
6) AUDIO (Front Panel Audio Header)
You may connect your chassis front panel audio module to this header. Make sure the wire assignments of
the module connector match the pin assignments of the motherboard header. Incorrect connection between
the module connector and the motherboard header will make the device unable to work or even damage
it.
Pin No.
Definition
Pin No.
Definition
1
LINE_OUT_R
6
LINE_IN_L
2
LINE_IN_R
7
AGND
3
AGND
8
AGND
4
AGND
9
NC
5
LINE_OUT_L
10
NC
Some chassis provide a front panel audio module that has separated connectors on each wire
instead of a single plug. For information about connecting the front panel audio module that has
different wire assignments, please contact the chassis manufacturer.
