Gigabyte GA-P55-UD6, User Manual, Page: 112 / 136

Appendix - 112 -
• Rebuilding in the operating system
Make sure the JMB362/GIGABYTE SATA2 SATA controller driver has been installed from the motherboard
driver disk. Launch the GIGABYTE RAID CONFIGURER from
All Programs in the Start menu.
Step 1:
In the GIGABYTE RAID CONFIGURER screen,
right-click on the array to be rebuilt in the
RAID
LIST block. Select Rebuild Raid . (Or click the
Rebuild icon in the tool bar.)
Step 3:
Select a drive to rebuild the array and click
Next .
Step 2:
When the Rebuilding RAID Wizard appears,
click
Next .
Step 4:
Click
Finish to start the RAID rebuilding process.
Step 6:
When finished, restart your system.
Step 5:
The rebuilding progress is displayed at the
bottom of the screen.