Gigabyte GA-K8NNXP-940 User Manual Download Page 10

Page: 10 / 112

- 10 -

GA-K8NNXP-940 Motherboard

English

On-Board IDE RAID

Onboard GigaRAID IT8212F chipset

Supports data striping (RAID 0) or mirroring (RAID 1) or
smirroring (RAID 0 + RAID 1)

Supports JBOD function

Supports concurrent dual ATA133 IDE controller operation

Support ATAPI mode for HDD

Supports IDE bus master operation

Support ATA133/RAID mode switch by BIOS

Displays status and error checking messages during boot-up

Mirroring supports automatic background rebuilds

Features LBA and Extended Interrupt 13 drive translation in
controller onboard BIOS

On-Board IEEE1394

Built-in Ti TSB82AA2

PS/2 Connector

PS/2 Keyboard interface and PS/2 Mouse interface

BIOS

Licensed AWARD BIOS

Supports Dual BIOS

Supports Face Wizard

Supports Q-Flash

Additional Features

Supports CPU Dual Power System (DPS)

PS/2 Keyboard power on

PS/2 Mouse power on

External Modem ring on

STR(Suspend-To-RAM)

Wake on LAN (WOL)

AC Recovery

Poly fuse for keyboard over-current protection

USB KB/Mouse wake up from S3

Supports Easy Tune 4

Supports @BIOS

Overclocking

Over Voltage (CPU/DDR/AGP) by BIOS

Over Clock (CPU/DDR/AGP) by BIOS

Please set the CPU host frequency in accordance with your processor's specifications.

We don't recommend you to set the system bus frequency over the CPU's specification because

these specific bus frequencies are not the standard specifications for CPU, chipset and most of the

peripherals. Whether your system can run under these specific bus frequencies properly will

depend on your hardware configurations, including CPU, Chipsets, SDRAM, Cards…etc.

k8nnxp-940_1001_i.p65

2003/10/2, ¤U¤È 05:18

Summary of Contents for GA-K8NNXP-940

















































































































Search results

Summary of Contents for GA-K8NNXP-940

Reviews:

Related manuals for GA-K8NNXP-940

Brands by name

Popular brands

Gigabyte GA-K8NNXP-940, User Manual

Search results

Summary of Contents for GA-K8NNXP-940

Reviews:

Related manuals for GA-K8NNXP-940

Brands by name

Popular brands