Hardware Installation
- 23 -
English
15) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily short
1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
Open: Normal
Short: Clear CMOS
1
1
14) IR_CIR
Make sure the pin 1 on the IR device is align with pin one the connector. To enable the IR/CIR function,
you are required to purchase an optional IR/CIR module. To use IR function only, please connect IR
module to Pin1 to Pin5. Be careful with the polarity of the IR/CIR connector. Check the pin assignment
carefully while you connect the IR/CIR cable, incorrect connection between the cable and connector will
make the device unable to work or even damage it. For optional IR/CIR cable, please contact your local
dealer.
Pin No.
Definition
1
Power
2
NC
3
IRRX
4
GND
5
IRTX
6
NC
7
CIRRX
8
+5VSB
9
CIRTX
10
NC
6
10
1
5
