&
Hardware Prefetcher
Enables or disables L2 Cache Hardware Prefetcher. (Default: Enabled)
&
Adjacent Cache Line Prefetch
Enables or disables L2 prefetching of adjacent cache lines. (Default: Enabled)
&
Intel Virtualization Technology
Enables or disables Intel
®
Virtualization Technology. Virtualization enhanced by Intel
®
Virtualization
Technology will allow a platform to run multiple operating systems and applications in independent partitions.
With virtualization, one computer system can function as multiple virtual systems. (Default: Enabled)
&
Power Technology
Allows you to configure Intel
®
power management features. (Default: Energy Efficient)
`
PPM Configuration
&
CPU C state Report
Enables or disables support for CPU's power-saving functions. (Default: Enabled)
&
Enhanced C state
Enables or disables Intel
®
CPU Enhanced Halt (C1E) function, a CPU power-saving function in system
halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state
to decrease power consumption. This item is configurable only when
CPU C state Report
is enabled.
(Default: Enabled)
&
Max CPU C-state
Allows you to determine the maximum C state that the CPU will support. Options include: C6, C1 (default).
This item is configurable only when
CPU C state Report
is enabled.
`
Thermal Configuration
&
DTS
Enables or disables the CPU overheating protection function. (Default: Disabled)
&
Critical Trip Point
Allows you to set the CPU temperature threshold. If the CPU temperature reaches this value, the operating
system will shut down the system. This item is configurable only when
DTS
is enabled. (Default: 100 C)
&
Passive Trip Point
Allows you to set the CPU temperature threshold. If the CPU temperature reaches this value, the CPU
frequency will be automatically reduced. This item is configurable only when
DTS
is enabled. (Default: 85 C)
`
IDE Configuration
&
Serial-ATA (SATA)
Enables or disables the integrated SATA controllers. (Default: Enabled)
`
SATA Mode
Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode. This
item is configurable only when
Serial-ATA(SATA)
is set to
Enabled
.
IDE Mode
Disables RAID for the SATA controllers and configures the SATA controllers to IDE
mode.
AHCI Mode
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
&
Serial-ATA Port 0/Serial-ATA Port 1
Enables or disables each SATA port. This item is configurable only when
Serial-ATA(SATA)
is set to
Enabled
. The area below displays the current status of each SATA port. (Default: Enabled)
- 26 -