- 11 -
Hardware Installation
USB
Chipset:
- 4 x USB 2.0/1.1 ports
(
2 ports on the back panel, 2 ports available through
the internal USB header
)
- 6 x USB 3.0/2.0 ports
(
4 ports on the back panel, 2 ports available through
the internal USB header
)
Internal
Connectors
1 x 24-pin AT
X
main power connector
1 x 4-pin AT
X
12V power connector
6 x SATA 6Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
1 x USB 3.0/2.0 header
1 x USB 2.0/1.1 header
1 x serial port header
1 x S/PDIF Out header
1 x Clear CMOS jumper
1 x chassis intrusion header
Back Panel
Connectors
1 x PS/2 keyboard/mouse port
2 x HDMI ports
2 x SMA antenna connectors
(
2T2R
)
1 x DVI-I port
4 x USB 3.0/2.0 ports
2 x USB 2.0/1.1 ports
2 x RJ-45 ports
1 x optical S/PDIF Out connector
5 x audio jacks
(
Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Line Out, Mic In
)
I/O Controller
iTE
®
I/O Controller Chip
Hardware
Monitor
System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System fan speed control
*
Whether the fan speed control function is supported will depend on the cooler you
install.
BIOS
2 x 64 Mbit
fl
ash
Use of licensed AMI UEFI BIOS
Support for DualBIOS
™
PnP 1.0a, DMI 2.7, SM BIOS 2.7, ACPI 2.0