Gigabyte GA-H81M-S1 Page 27 User Manual Download

Page: 27 / 33

- 27 -

Auto

BIOS routes the sharable ports to EHCI controller. Then it uses ACPI protocols to

provide an option to enable the xHCI controller and reroute the sharable ports. Note:

This is the recommended mode when BIOS does NOT have xHCI pre-boot support.

Enabled

All shared ports are eventually routed to the xHCI controller during the BIOS boot process.

If BIOS does not have pre-boot support for the xHCI controller, it should initially route

the sharable ports to the EHCI controller and then prior to OS boot it should route the

ports to xHCI controller. Note: OS has to provide support for the xHCI controller in this

mode. If the OS does not provide support, all sharable ports won't work.

Disabled

The USB 3.0 ports are routed to the EHCI controller and the xHCI controller is turned

off. All USB 3.0 devices function as High Speed devices regardless of xHCI software

support/availability.

Manual

Allows you to determine whether to rout the USB 3.0 ports to the xHCI or EHCI controller

before booting to OS, and also provides you with options to manually rout each USB

3.0/2.0 port to xHCI or EHCI.

Audio Controller

Enables or disables the onboard audio function. (Default: Auto)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled

Intel Processor Graphics

Enables or disables the onboard graphics function. (Default: Enabled)

Intel Processor Graphics Memory Allocation

Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)

DVMT Total Memory Size

Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.

(Default: MAX)

Legacy USB Support

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

XHCI Hand-off

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off sup-

port. (Default: Enabled)

EHCI Hand-off

Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off sup-

port. (Default: Disabled)

USB Storage Devices

Displays a list of connected USB mass storage devices. This item appears only when a USB storage device

is installed.

OnBoard LAN Controller

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled

SATA Configuration

Integrated SATA Controller

Enables or disables the integrated SATA controllers. (Default: Enabled)

Summary of Contents for GA-H81M-S1


































Search results

Summary of Contents for GA-H81M-S1

Reviews:

Related manuals for GA-H81M-S1

Brands by name

Popular brands

Gigabyte GA-H81M-S1, User Manual

Search results

Summary of Contents for GA-H81M-S1

Reviews:

Related manuals for GA-H81M-S1

Brands by name

Popular brands