- 11 -
•
When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
•
When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent
an electrical short inside the cable connector.
To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the
multi-channel audio feature through the audio driver.
Line Out Jack (Green)
The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used
to connect front speakers in a 4/5.1/7.1-channel audio configuration.
Mic In Jack (Pink)
The default Mic in jack. Microphones must be connected to this jack.
1-7 Internal Connectors
Read the following guidelines before connecting external devices:
•
First make sure your devices are compliant with the connectors you wish to connect.
•
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
•
After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.
1)
ATX_12V_2X4
2)
ATX
3)
CPU_FAN
4)
SYS_FAN1/2
5)
SATA3 0/1
6)
SATA2 2/3
7)
F_PANEL
8)
F_AUDIO
9)
F_USB1/F_USB2
10)
BAT
11)
CLR_CMOS
1
2
7
4
9
5
8
10
4
3
11
6
Summary of Contents for GA-H81M-DS2V
Page 1: ...GA H81M DS2V User s Manual Rev 1001 12ME H81DS2V 1001R ...
Page 29: ... 29 ...
Page 30: ... 30 ...
