Gigabyte GA-H81M-D3V, User Manual

Page: 29 / 36

- 29 -
`
Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port and
parallel port.
&
Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
&
Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
&
Device Mode
This item is configurable only when Parallel Port is set to Enabled . It allows you to select an operating
mode for the onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode
(Enhanced Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode.
`
Realtek PCIe GBE Family Controller
This sub-menu provides information on LAN configuration.
2-6 Power Management
&
Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled . Auto lets the BIOS automatically configure this
setting. (Default: Auto)
&
Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.