background image

- 14 -

5)  SATA3 0/1 (SATA 6Gb/s Connectors)

 

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 

1.5Gb/s standard. Each SATA connector supports a single SATA device.

Pin No.

Definition

Pin No.

Definition

1

GND

5

RXN

2

TXP

6

RXP

3

TXN

7

GND

4

GND

SATA3

SATA2

1 0

3 2

7

7

DEBUG  PO

RT

G.QBOFM

DEBUG  PO

RT

G.QBOFM

1

1

7

7

DEBUG  PO

RT

G.QBOFM

DEBUG  PO

RT

G.QBOFM

1

1

6)  SATA2 2/3 (SATA 3Gb/s Connectors)

 

The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5Gb/s standard. 

Each SATA connector supports a single SATA device.

Pin No.

Definition

Pin No.

Definition

1

GND

5

RXN

2

TXP

6

RXP

3

TXN

7

GND

4

GND

3/4) CPU_FAN/SYS_FAN (Fan Headers)

 

The motherboard has a 4-pin CPU fan header (CPU_FAN) and a 4-pin system fan header (SYS_FAN). 

Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it 

in the correct orientation (the black connector wire is the ground wire). The speed control function requires 

the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a 

system fan be installed inside the chassis.

CPU_FAN

SYS_FAN

DEBUG 

PO

RT

G.QBOFM

DEBUG 

PO

RT

G.QBOFM

1

1

CPU_FAN:

Pin No.

Definition

1

GND

2

+12V

3

Sense

4

Speed Control

 

Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating 

may result in damage to the CPU or the system may hang.

 

These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.

SYS_FAN:

Pin No.

Definition

1

GND

2

+12V/Speed Control

3

Sense

4

VCC

Summary of Contents for GA-H81M-D2V





































Reviews: