Gigabyte GA-H67MA-USB3-B3 User Manual Download Page 20

Page: 20 / 104

Hardware Installation

- 20 -

1-7 Back Panel Connectors

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB key

board/mouse, USB printer, USB flash drive and etc.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector. Connect a monitor that supports D-Sub connection
to this port.

DVI-D Port

(Note)

The DVI-D port conforms to the DVI-D specification and supports a maximum resolution of 1920x1200

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports
DVI-D connection to this port.

HDMI Port

The HDMI (High-Definition Multimedia Interface) provides an all-digital audio/video interface to transmit

the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video device to
this port. The HDMI Technology can support a maximum resolution of 1920x1200 but the actual resolu-
tions supported depend on the monitor being used.

After installing the HDMI device, make sure the default device for sound playback is the HDMI

•

device. (The item name may differ from operating system. Refer to the figure below for details.)

Please note the HDMI audio output only supports AC3, DTS and 2-channel-LPCM formats.

•

(AC3 and DTS require the use of an external decoder for decoding.)

In Windows 7, select Start>Control Panel>Hardware
and Sound>Sound>Playback, set

Intel(R) Display Au-

dio

to the default playback device.

(Note) The DVI-D port does not support D-Sub connection by adapter.

Summary of Contents for GA-H67MA-USB3-B3









































































































Search results

Summary of Contents for GA-H67MA-USB3-B3

Reviews:

Related manuals for GA-H67MA-USB3-B3

Brands by name

Popular brands

Gigabyte GA-H67MA-USB3-B3, User Manual

Search results

Summary of Contents for GA-H67MA-USB3-B3

Reviews:

Related manuals for GA-H67MA-USB3-B3

Brands by name

Popular brands