Gigabyte GA-F2A68H-DS3 Page 25 User Manual Download

Page: 25 / 36

- 25 -

2-5 Peripherals

Network stack

Disables or enables booting from the network to install a GPT format OS, such as installing the OS from

the Windows Deployment Services server. (Default: Disable Link)

Ipv4 PXE Support

Enables or disables IPv4 PXE Support. This item is configurable only when

Network stack

is enabled.

Ipv6 PXE Support

Enables or disables IPv6 PXE Support. This item is configurable only when

Network stack

is enabled.

PXE boot wait time

Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is

configurable only when Network stack is enabled.

Administrator Password

Allows you to configure an administrator password. Press <Enter> on this item, type the password, and

then press <Enter>. You will be requested to confirm the password. Type the password again and press

<Enter>. You must enter the administrator password (or user password) at system startup and when entering

BIOS Setup. Differing from the user password, the administrator password allows you to make changes to

all BIOS settings.

User Password

Allows you to configure a user password. Press <Enter> on this item, type the password, and then press

<Enter>. You will be requested to confirm the password. Type the password again and press <Enter>.

You must enter the administrator password (or user password) at system startup and when entering BIOS

Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.

To cancel the password, press <Enter> on the password item and when requested for the password, enter

the correct one first. When prompted for a new password, press <Enter> without entering any password.

Press <Enter> again when prompted to confirm.

NOTE: Before setting the User Password, be sure to set the Administrator Password first.

IOMMU

Enables or disables AMD IOMMU support. (Default: Enabled)

OnChip USB Controller

Enables or disables the integrated USB controller. (Default: Enabled)

Summary of Contents for GA-F2A68H-DS3





































Search results

Summary of Contents for GA-F2A68H-DS3

Reviews:

Related manuals for GA-F2A68H-DS3

Brands by name

Popular brands

Gigabyte GA-F2A68H-DS3, User Manual

Search results

Summary of Contents for GA-F2A68H-DS3

Reviews:

Related manuals for GA-F2A68H-DS3

Brands by name

Popular brands