Gigabyte GA-EP45-UD3P, User Manual, Page: 39 / 128

- 39 - BIOS Setup
2-3 MB Intelligent Tweaker(M.I.T.)
(Note 1) This item appears only if you install a CPU that supports this feature.
(Note 2) This item appears only if you install a memory module that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
MB Intelligent Tweaker(M.I.T.)
KLJI
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
`
Memory Frequency (Mhz) 1333 1066
DRAM Timing Selectable (SPD) [Auto]
>>>>> Standard Timing Control
x CAS Latency Time 5 Auto
x tRCD 5 Auto
x tRP 5 Auto
x tRAS 15 Auto
>>>>> Advanced Timing Control
`
Advanced Timing Control [Press Enter]
******** Mother Board Voltage Control ********
Voltage Types Normal Current
------------------------------------------------------------------
>>> CPU
Load-Line Calibration [Disabled]
CPU Vcore 1.12500V [Auto]
CPU Termination 1.200V [Auto]
CPU PLL 1.500V [Auto]
CPU Reference 0.760V [Auto]
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster [Auto]
CPU Clock Ratio
(Note 1)
[10X]
Fine CPU Clock Ratio (Note 1) [+0.0]
CPU Frequency 2.66GHz (266x10)
******** Clock Chip Control ********
>>>>> Standard Clock Control
CPU Host Clock Control [Disabled]
x CPU Host Frequency (Mhz) 266
PCI Express Frequency (Mhz) [Auto]
C.I.A. 2 [Disabled]
>>>>> Advanced Clock Control
`
Advanced Clock Control [Press Enter]
******** DRAM Performance Control ********
Performance Enhance [Turbo]
Extreme Memory Profile (X.M.P.)
(Note 2)
[Disabled]
(G)MCH Frequency Latch [Auto]
System Memory Multiplier (SPD) [Auto]
KLJI
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
`