Gigabyte GA-EP41T-UD3L, User Manual, Page: 76 / 96

Appendix - 76 -
Step 2:
Connect an audio device to an audio jack. The
The
current connected device is dialog box appears. Select
the device according to the type of device you connect.
Then click
OK .
Step 3:
On the
Speakers screen, click the Speaker Configura-
tion tab. In the Speaker Configuration list, select Stereo ,
Quadraphonic , 5.1 Speaker , or 7.1 Speaker according to
the type of speaker configuration you wish to set up. Then
the speaker setup is completed.
If your chassis provides an AC'97 front panel audio mod-
ule, to activate the AC'97 functionality, click the tool icon
on the
Speaker Configuration tab. On the Connector
Settings dialog box, select the Disable front panel jack
detection check box. Click OK to complete.
Click Device advanced settings on the top right corner
on the Speaker Configuration tab to open the Device
advanced settings dialog box. Select the Mute the rear
output device, when a front headphone plugged in
check box. Click OK to complete.
B. Configuring Sound Effect
You may configure an audio environment on the Sound Effects tab.
C. Activating an AC'97 Front Panel Audio Module
D. Muting the Back Panel Audio (For HD Audio Only)